MEDIUM VOLTAGE POWER CABLE
Nonshielded-5kV-XLP Insulation
FAA L824 Type C, Single Conductor
Download PDF

CONSTRUCTION
Conductor: - Annealed (soft) copper
- Class B stranding
Insulation: - Cross-Linked Polyethylene (XLP)
- Extruded concentrically over the conductor to the wall thickness
Conductor Shield: - Extruded semi-conducting layer
Applications:
- Suitable for use in dry locations at continuous conductor temperature of 90°C
- May be installed in conduit, duct, or properly supported aerial installations
- Suitable for airport lighting cable applications.
- Rated for Wet Location and Direct Burial Rated
- Suitable for all applications in which ICEA allows use of non-shielded cable at voltages of 2001 volts and above
Standards:
- ICEA S-95-659
Part # AWG Size No. of Strands Nom. Insul. Thick. Nom. O.D.(center).   Lbs./M’
MVX10801 8 7 .110" .375" 94
MVX10601 6 7 .110" .415" 130
MVX10401 4 7 .110" .460" 189
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.
*Used as Airport Lighting Cable under FAA Regulation L824-C.