Aluminum Interlocked Armor
XLPE Insulation – PVC Jacket
90°C – 600 Volt
14 AWG & 12 AWG – Multi-conductor
XLPE Insulation – PVC Jacket
90°C – 600 Volt
14 AWG & 12 AWG – Multi-conductor
Download PDF
Email PDF
Construction | |
---|---|
Conductor |
|
Insulation |
|
Armor |
|
Jacket |
|
Applications:
- In all raceways or direct burial
- In wet or dry locations
- Permitted for use in Class I, Division II and Class II, Division II, and Class III, Division I and II per NEC Article 334
Features:
- Rated at 90°C wet or dry
- Sunlight resistant
- Provides excellent oil and chemical resistance
- Excellent crush resistance
- Provides a long service life
- Flame-retardant and resistant to moisture
- Cost-effective alternative to installations in conduit
- Meets cold bend test at -25°C
Standards:
- UL 1569, UL 44, UL 1581, UL Type MC-600 volts
- NEC Type XHHW-2 conductors
- IEEE 1202
- OSHA Acceptable
Part # | AWG | Conductors | Ground AWG | Insulation Thickness | Nominal O.D. over Armor | Nom. O.D. Overall | Lbs./M' |
---|---|---|---|---|---|---|---|
Y11403A | 14 | 3 | 14 | .030″ | .520″ | .630″ | 183 |
Y11404A | 14 | 4 | 14 | .030″ | .55″ | .66″ | 233 |
Y11405A | 14 | 5 | 14 | .030″ | .590″ | .690″ | 246 |
Y11407A | 14 | 7 | 14 | .030″ | .640″ | .740″ | 297 |
Y11409A | 14 | 9 | 14 | .030″ | .700″ | .830″ | 379 |
Y11412A | 14 | 12 | 14 | .030″ | .800″ | .900″ | 460 |
Y11419A | 14 | 19 | 14 | .030″ | .990″ | 1.020″ | 621 |
Y11202A | 12 | 2 | 12 | .030″ | .53″ | .64″ | 218 |
Y11212A | 12 | 12 | 12 | .030″ | .86″ | .89″ | 596 |
Y11219A | 12 | 19 | 12 | .030″ | .99″ | 1.10″ | 830 |
*Fittings are available for these products.
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.