Continuously Corrugated Welded Cable – CCW®
XLPE Insulation – PVC Jacket
90°C – 600 Volt – UL Type MC-HL 4-Conductor
XLPE Insulation – PVC Jacket
90°C – 600 Volt – UL Type MC-HL 4-Conductor
Download PDF
Email PDF
Construction | |
---|---|
Conductor |
|
Insulation |
|
Ground |
|
Armor |
|
Jacket |
|
Applications:
- For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance with NEC articles 330 and 725
- Class I, II and III, Divisions 1 and 2; Class I, Zones 1 and 2 hazardous locations per NEC articles 501, 502, 503, and 505
- Installed indoors or outdoors, wet or dry locations, direct buried, embedded in concrete, in a raceway, as aerial on a messenger, or as exposed runs secured to supports in accordance with NEC article 330
Features:
- CCW armor provides an impervious barrier to moisture, gas and liquids
- CCW armor provides EMI shielding performance
- Meets cold impact at -40°C
- Factory assembled and tested cable for use as an alternate to cable in conduit wiring systems
- 90°C continuous operating temperature, wet or dry
- 130°C emergency rating
- 250°C short circuit rating
Standards:
- UL 44, 1569, 2225, 1309, 1581
- IEEE 1202 available upon request
Part # | AWG | Pairs | Lbs./M' |
---|---|---|---|
1058A | 20 | 12 | 194 |
4AWG and larger uses Black with printed numbers.
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances. Please verify specific requirements with your Omni Cable account manager.
General Cable CCW® is a registered trademark of General Cable.