Omni Cable

(800) 292-OMNI

MEDIUM VOLTAGE POWER CABLE

Single Conductor, EPR Insulation – PVC Jacket
35 kV, EPR/Copper Tape Shield
UL Type MV-105
133% Insulation Levels

Download PDF

Email PDF

Construction
Conductor
  • 1/0 AWG thru 1000 kcmil annealed bare copper compact Class B strand
Extruded Strand Shield
  • Extruded thermoset semi-conducting stress-control layer over conductor
Insulation
  • Lead-free Ethylene Propylene Rubber (EPR) insulation, contrasting in color to the black semi-conducting shield layers
Extruded Insulation Shield
  • Thermoset semi-conducting polymeric layer free stripping from insulation
Metallic Shield
  • 5 mil annealed copper tape with an overlap of 25%
Jacket
  • Low-friction, lead-free, flame-retardant, moisture and sunlight-resistant Polyvinyl Chloride (PVC)

Applications:

  • Superior performance in petrochemical plants, pulp and paper mills, sewage and water treatment plants, environmental protection systems, railroads, mines, utility power generating stations, steel mills, textile plants and other industrial three-phase applications
  • For use in wet or dry locations when installed in accordance with NEC
  • For use in aerial, conduit, open tray and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)

Features:

  • Rated at 105˚C
  • Low friction for easy pulling
  • Excellent heat and moisture resistance
  • Excellent flame resistance
  • Outstanding corona resistance
  • Flexibility for easy handling
  • High dielectric strength
  • Low moisture absorption
  • Electrical stability under stress
  • Low dielectric loss
  • Chemical-resistant
  • Meets cold bend test at -35˚C
  • 105°C rating for continuous operation
  • 140°C rating for emergency overload conditions
  • 250°C rating for short circuit conditions

    Standards:

    • National Electrical Code (NEC)
    • UL 1072
    • ICEA S-93-639/NEMA WC74
    • ICEA S-97-682
    • AEIC CS8
    • UL listed as Type MV-105 for use in accordance with NEC, UL File # E90501
    • IEEE 1202 (70,000 BTU/hr)/CSA FT4
    • EPA 40 CFR, Part 261 for leachable lead content per TCLP method
    • OSHA Acceptable
    • RoHS Compliant

    Part # AWG Conductor Diameter Insulation Diameter Min. Insulation Diameter Max. Jacket Thickness Nom. O.D. Lbs./M'
    MVE51/001 1/0 .340″ 1.060″ 1.265″ .080″ 1.47″ 1328.9
    MVE52/001 2/0 .380″ 1.200″ 1.305″ .080″ 1.49″ 1378
    MVE53/001 3/0 .430″ 1.245″ 1.355″ .080″ 1.53″ 1532
    MVE54/001 4/0 .480″ 1.300″ 1.405″ .080″ 1.59″ 1804
    MVE525001 250 .530″ 1.350″ 1.460″ .080″ 1.64″ 1959
    MVE535001 350 .620″ 1.450″ 1.555″ .110″ 1.79″ 2396
    MVE550001 500 .740″ 1.570″ 1.675″ .110″ 1.91″ 3120
    MVE575001 750 .910″ 1.750″ 1.860″ .110″ 2.09″ 4109
    MVE5100001 1000 1.06″ 1.900″ 2.010″ .110″ 2.25″ 4885

    *Accessories are available for all medium voltage products.